Contents
Contents
Brushing is a job to others but if you are on a budget it could be a game to do it your own way, This a comprehensive guide on how to paint like a pro from Maramani
The very initial step in painting is estimating how much paint you need, grab a tape measure and measure all the walls ready to receive the painting, usually one gallon of paint covers 400 square feet
Materials
Tools
Before starting the actual painting have someone assist you in moving furniture outside or to the center of the room in case of heavier furnishings, cover them with drop clothes to avoid accidental staining,
If you intend to paint the ceiling disengage the chandeliers and all lighting fixtures, that way, you will work faster
It's necessary to allocate a few hours prepping your walls; patching holes, cleaning, and sanding are all relevant to achieving the best result. This isn't the fun part of painting a room, but it is the most important part. No paint, regardless of its cost, color, thickness, or manufacturer's claims, will hide a cracked surface.
You will need a few tools for the preliminary works
Step 1
If surfaces have been freshly cemented or are discolored from nicotine, rainwater or mould decay, offer a sealer or prime coat first. This extra step will help the paint to adhere to the surface and will minimize the total number of coats required.
Prime coat sometimes known as stain blockers. will help to reduce the likelihood that staining will leak through the top coats of paint over time so that you won't need to repaint in the near future. For freshly plastered walls, choose a specialist plaster sealer.
Step 2
Cut in around the edges of the room.
SThis will include;
Use a good quality 38mm (1½”) or 50mm (2”) precision tip or angled brush for this. These brushes should help you to paint a neat, straight line.
Step 3
Pour emulsion paint into the storage of the paint tray until it is approximately one-third full. Dip the roller sleeve into the paint, and spread evenly by rolling it firmly on the ribbed incline of the tray. To reduce splatters as you work, avoid overloading the sleeve with paint.
You can use a roller with or without a roller pole to paint walls - whichever you find most comfortable. A roller pole can make it easier to reach the top of the wall, but you can also use a step ladder or work platform to reach if you prefer.
Step 4
Work out from the ends by rolling paint in 1m wide ‘W’ patterns and go back over the W to fill in the open areas. The intention is to apply the paint evenly and always work from a 'wet' edge.
Always work from top to bottom
Step 5
Once you get some paint on the walls you can go back along the edges. Turn the roller sideways to get really close to the ceiling and baseboards.
To remove buildup and runs, lightly roll over the painted area from the ceiling down to the floor. Apply very little pressure.
Now that you've finished your painting, it's time to give your brushes and rollers a good clean so they're ready for use next time.
By Polycarp Bosire